Euky Bear Vaporiser

Save $5
Euky BearSKU: 7070061702

$64.99 $69.99
Add to Wishlist



  • Natural, all-night relief from the symptoms of colds & flu, croup, bronchitis and hayfever
  • Humidifies all night
  • Safety features
  • Suitable for all ages
  • Whisper quiet
  • 5 year warranty

Breathe easier, sleep better. Euky Bear Steam Vaporiser creates a soothing flow of warm steam to help relieve the symptoms of colds and flu. 

Warm humidity helps loosen congestion to make breathing easier. The added moisture also soothes sore, irritated throats, and relieves itchy eyes and dry skin.

        Euky Bear Vaporiser is suitable for:

        Suitable for adults and children.


        1. Twist to unlock the unit and remove.
        2. Add Euky Bear Inhalant (not included) and Cleaning Tablet for optimal operation.
        3. Add water to the maximum fill line.
        4. Re-insert unit, twist to lock in place.
        5. Plug into power point, place on the floor mat at least 1.2 meters away from any person.

        Steaming will start in a few minutes and stop when the water level drops below the minimum required amount. Switch off when steaming is complete.  

        Recommended using with Euky Bear Sniffly Nose Inhalant with soothing essential oils for added comfort.  

        Euky Bear Cleaning Tablets help keep the vaporiser running in optimum condition. 

         Please refer to full Instruction Manual and read carefully before use.

          Warning and Disclaimers:

          Always read the label. Follow the directions for use.

          If symptoms persist, talk to your healthcare professional.


          Q. What are the black ‘flakes’ in my vaporiser after use?

          This can be normal depending on where you live. They are mineral deposits from your tap water. Depending on the water in your area it can be black, brown, grey or orange and can look like dirt, sand or flakes.  The residue is harmless and can be flushed away when you rinse and empty the container.  To avoid the flecks appearing it is best to rinse the base of the heating module and clean the vaporiser according to the operating manual on a weekly basis during continued use.  As water sources vary from region to region, this cleaning process may need to be undertaken more frequently if flecks are appearing more regularly. 

          Q.  Can I re-use the water that’s left, or do I need to empty and refill after each use? 

          Always empty and rinse your vaporiser container and the base of the heating module in between each use to help wash away built-up mineral residue and excess inhalant. 

          Q.  I’m worried about mould?

          The units will not develop mould during normal use.  Steam output from the unit is germ-free and sanitised.   However, do not let your vaporiser sit in old water as it may erode and degrade the parts.  To reduce excess condensation in the room, always leave the door slightly open during use and air out the room in the morning. 

          Q. I’m noticing a strange plastic smell?

          An unpleasant odour can be due to one of the following:

          • A new vaporiser – this is normal and should not last beyond a few uses/ rinses

          • Adding inhalant after the water – always add before, as instructed.

          • Wrong inhalant or other non-inhalants used (see next Q’s below)

          • Not rinsing the vaporiser and cleaning according to the instructions

          • Leaving your vaporiser to ‘run dry’ or other misuses 

          Q. Can I add pure (100%) essential oils or oil blends to my vaporiser?

          No.  Use only water-soluble inhalants designed for vaporisers, like Euky Bear Sniffly Nose or Sleepy Time Inhalant.   

          Q.  Can I use Euky Bearub, or Vicks ointment in my vaporiser?

          No.  Chest rubs do not dissolve in water and will damage your vaporiser.  Use of pure oils, chest rubs, solutions or ointments in your vaporiser will void your warranty. 

          Q.  Can I only use Euky Bear Inhalant in my vaporiser?

          We recommend Euky Bear Sniffly Nose or Sleepy Time Inhalants.  Only use a water-soluble inhalant designed for vaporisers.  Other brands we recommend include Vicks VapoSteam and Bosisto’s

          Q.  I don’t think my vaporiser is steaming enough/ I can’t smell the inhalant.  How can I tell it’s working?

          In the morning the water level should have dropped.  If this is happening, your vaporiser is working.

          It’s also normal not to smell inhalant after a while as our senses become dulled to consistent aromas.  If you are using the correct amount of inhalant then you can be confident it is working correctly. 

          Q.  Why do you recommend placing the vaporiser on the floor, not on a bedside table?

          The unit needs to be positioned on the floor to avoid any risk of it falling or being accidentally pulled down, especially by a child.  We recommend on a carpeted floor, rug or towel, 1.2 meters away from the bed. The unit doesn’t need to be near the intended recipient as the steam will uniformly disperse in the room.  

          Q.  My vaporiser feels hot.

          This is normal.  Like a kettle, vaporisers can get hot.  Care needs to be taken not to touch during operation, especially around the steam vent. As per the operating manual, always keep it out of reach of children.  

          More from: 

          Euky Bear


          Barcode: 9300710012005

          Customer Reviews

          Based on 2 reviews Write a review

          Payment & Security

          American Express Apple Pay Google Pay JCB Mastercard PayPal Shop Pay Visa

          Your Payment Information is Processed Securely. We do Not Store Credit Card Details Nor Have Access To Your Credit Card Information.

          You May Also Like

          Recently Viewed